notes

notes.txt

@@ -0,0 +1,45 @@
+TRANSDUCER\d  - array of TRANSDUCERS
+- Instrument Pressure \d # As Found
+- Master Value \d   # Gauge Reading Set Point
+- Note: IP1 = MV1 
+    
+Once selected, prompt for "As Found", "As Left", or "Both"
+- If as left, proppt for as found file. etc etc.
+- If both, continue on with logic.
+
+If Transducer Name contains "CUSTOM" - prompt for the name in an input box  (change to Type)
+Part Number: "CTS A12-221" Value "250CCM"
+
+Data to always enter in
+- Instrument
+- Customer Name
+- Customer Address
+- Control Number
+- Serial Number
+- Accuracy (once, but applies to the full List)
+- Barometric Pressure
+- Temperature
+- Humidity
+
+
+Auto Data
+- Date [Verify Date]
+- Part Number  "middle number from Part Name/Type variable"
+
+
+Calculations: etc
+- High Limit/ Low Limit eg: (SPAN*1.0005 + column) (SPAN*0.9995 - column)
+- Delta =  abs(gauge reading) - abs(asleft|asfound) 
+- PSIA - PRESSURE
+- SCCM - FLOW
+- TRANSDUCER1 Will ALWAYS be pressure
+
+CONFIG: 
+- Mensor Numbers etc
+	- Cal device, cal serial, Cal cal date, cal due date
+	
+	
+# HARDWARE CALIBRATION
+ -  "Mass Flow Trans"  look at `Instrument Flow` and `Master Reading`
+ -  "Pressure Transducer"  `Instrument Pressure` and `Master Value`
+-  Always take the SECOND `Master Value`

parse_hardware.py

@@ -58,20 +58,9 @@ def parse_file(file_path):
     instrument_info = parse_instrument_info(info_section)
     calibration_data = parse_ports(calibration_section)
 
-    return instrument_info, calibration_data
+    return {"instrument": instrument_info, "calibration": calibration_data}
 
 if __name__ == "__main__":
     file_path = "./hardware_calibration.txt"  # Replace with the actual file path
-    instrument_info, calibration_data = parse_file(file_path)
-
-    print("Instrument Info:")
-    print(instrument_info)
-
-    print("\nCalibration Data:")
-    for device_name, device_data in calibration_data.items():
-        print(f"\nDevice: {device_name}")
-        for port, transducers in device_data.items():
-            print(port)
-            pprint(transducers)
-            
-          
+    data = parse_file(file_path)
+    pprint(data)

tags

@@ -0,0 +1,19 @@
+!_TAG_FILE_FORMAT	2	/extended format; --format=1 will not append ;" to lines/
+!_TAG_FILE_SORTED	1	/0=unsorted, 1=sorted, 2=foldcase/
+!_TAG_PROGRAM_AUTHOR	Darren Hiebert	/dhiebert@users.sourceforge.net/
+!_TAG_PROGRAM_NAME	Exuberant Ctags	//
+!_TAG_PROGRAM_URL	http://ctags.sourceforge.net	/official site/
+!_TAG_PROGRAM_VERSION	Development	//
+KEEP	parse_hardware.py	/^KEEP = {$/;"	v
+data	parse_hardware.py	/^    data = parse_file(file_path)$/;"	v
+file_path	parse_hardware.py	/^    file_path = ".\/hardware_calibration.txt"  # Replace with the actual file path$/;"	v
+file_path	parse_transducer.py	/^    file_path = '.\/transducer_verify.txt'$/;"	v
+parse_calibration_data	parse_hardware.py	/^def parse_calibration_data(text):$/;"	f
+parse_file	parse_hardware.py	/^def parse_file(file_path):$/;"	f
+parse_instrument_info	parse_hardware.py	/^def parse_instrument_info(text):$/;"	f
+parse_ports	parse_hardware.py	/^def parse_ports(text):$/;"	f
+parse_transducer	parse_transducer.py	/^def parse_transducer(file_path):$/;"	f
+parsed_data	parse_transducer.py	/^    parsed_data = parse_text_file(file_path)$/;"	v
+pprint	parse_hardware.py	/^from pprint import pprint$/;"	i
+re	parse_hardware.py	/^import re$/;"	i
+re	parse_transducer.py	/^import re$/;"	i