flying-blog import #3

Merged
tyrel merged 5 commits from flying-blog into main 2023-05-26 16:19:50 +00:00
45 changed files with 399 additions and 0 deletions
Showing only changes of commit 99fde60e09 - Show all commits

View File

@ -0,0 +1,12 @@
May 26, 2021 First flight as a PPL
####################################
:author: tyrel
:category: flying
:tags: flying
:status: published
On April 26th, I took my first flight as a Private Pilot. I was flying with a CFI for a checkout to rent planes from the Wings of Carolina club, so the flight was nothing really to talk much about. It was really hot, and my first flight in almost 5 months, so I was definitely rusty.
Mostly using this flight as a stepping stone to try out the GPX viewer§. I flew a PA28-161 Warrior II N8080A for One hour. Flew from KTTA, up north west a bit, did a few steep turns, then back to KTTA.
§ - Not ported over, no JS on this blog.

View File

@ -0,0 +1,37 @@
May 27, 2021 Second flight as a PPL
#####################################
:author: tyrel
:category: flying
:tags: flying
:status: published
I was able to sneak in a cooler morning flight in N8080A. I took my motorcycle to the airport, but forgot my yoke mount so I was iPad-less. We had to wait for a long while to get fuel because the services truck was filling the HU-16 that had arrived a few days beforehand. There was also a C-27 taking off, super cute, Feels like a baby C-130!
.. figure:: {static}/images/2021/05/20210527_hu16.jpg
:alt: Grumman HU-16 Albatross
Grumman HU-16 Albatross
.. figure:: {static}/images/2021/05/20210527_c27.jpg
:alt: Alenia C-27J Spartan
Alenia C-27J Spartan
We went up, took a few minutes to do another 45° bank turn. I did that a little better, less shaky. Then he had me practice some emergency descents. I didnt do as well at those as I should. I need faster ADM skills. That will come with time, one of my big weaknesses is emergency things, so its one thing Im excited to start practicing.
After the emergency procedures, he had me practice rudder control. Putting in enough rudder while turning to hold on target before the turn and rolling out while pointing at a target but rolling out. Im much better at rolling out than rolling in, so Im excited to have a new procedure to practice. One of the things I like a lot about this CFI giving me the checkout to borrow planes, is that hes young. He doesnt have these really old ways of thinking about things and I appreciate that.
After the higher altitude stuff, he wanted to see some short-field landings. The first time in the pattern we had to extend our downwind A LOT, there were three people on long finals, so our downwind was funky and long. Im still getting used to this plane and the runway so by the time we were about to touch down, the other plane in front of us was still on the runway (albeit turning onto taxiway A3 a mile down the runway) so he said go around, as technically the other plane was still on the runway and things could go wrong even with that far separation.
Did a go around and the next two short fields were okay. We got off at Taxiway A2 I think, and then took taxiway A back to the ramp. When we got to the intersection with A and A1 there was another plane getting ready to cross the threshold, but it was a Cessna 172… high wing! They didnt notice that there was a taildragger apparently norad coming on a 45° final, not straight in and almost rolled into the runway. Luckily the CFI I was with shouted STOP on the CTAF and they stopped, seconds before an incursion! EEEEK!
Wrapped up, and planned our third checkout ride, itll be down to KFAY, a controlled field. Should be on June 2nd and then Ill be cleared to rent the planes and feel like a full member of the Wings of Carolina!
Unfortunately no GPX file, but I have a screenshot.
.. figure:: {static}/images/2021/05/20210527_track.png
:alt: GPX Track across the Raleigh Durham area west of Jordan Lake
GPX Track across the Raleigh Durham area west of Jordan Lake

View File

@ -0,0 +1,22 @@
WOC Final Checkout Ride
#######################
:author: tyrel
:category: flying
:tags: flying
:status: published
I can finally rent planes through Wings of Carolina! Flew today and the CFI passed me.
I was a bit nervous about the North Carolina weather so I text the instructor to see if we could leave an hour early for the controlled airspace portion of the checkout. He said lets shoot for 3:30, we took off at 4 because he gave me a bit of ground instruction on the systems in N8116J. (Also we couldnt figure out the radio, so had to push a few buttons to get comms working. It seems when 16J was in the shop, they had undone all the COM1 COM2 selection buttons, which caught us off guard.)
We took off, then flew south to Fayetteville (KFAY), Luke showed me the auto pilot, how to climb, descend, turn to a heading, so we enabled that on the flight to KFAY. 20 miles north, called approach, I fumbled my radio A LOT. I definitely need more controlled airspace practice. ATC Talks FAST. Its hard to fly the plane and copy things down, I think I need to start using a pen and paper, not Foreflight for ATC remarks, itll be much easier. I put a FieldNotes book in my flight bag the other day, time to use it! After a few more fumbles (I copied back the altimeter, not the altitude, talk about stress!) I was cleared to land. Squawked 0210 and landed on runway 22 almost straight in, I took a right handed base, it was weird! There were no commercial flights so they were at a lull of traffic which is why I just got the RWY22 CLEAR TO LAND. Unfortunately (or Fortunately..) LIVE ATC and KFAY approach are down so I have no recording of my fumbles. Would have been nice to hear them again so I could learn.
We landed, taxied back to runway 22, and then said we were taking off VFR. Squawked 0212 now and departed, stayed runway heading until they said turn right heading 320 staying at or below 2500. Then a bit later they said fly flight plan heading I turned 355 and then we finally got out of their airspace. Theres two airports there, KFAY and Simmons Army Airfield (KFBG), so their airspace looks like a cell dividing, two round circles and of course we bisected it the long way.
Out of their airspace Luke said “I have the controls”, then banked hard 60 degrees right, and pointed down. He said “If youre ever VFR and inadvertently hit IMC weather, and get into an unusual attitude, hit this button [LVL] and presto, the wings will level.” which of course they did. Auto pilot is still wild to me, I never flew with it in N43337, so its going to take a lot to get used to, but Im sure Ill start loving it.
We then called 10mi on the 45 for RWY22, did a touch and go, (I came in a little higher than I wanted I still need to learn the sight pictures for this airport, but oof its FLAT still.) took off did the pattern once more and did a full stop.
On this flight, I learned the GPS a little bit more, the touch screen menu will make selecting comms so much easier, glad they have these consistently in all their planes. I also learned AutoPilot, I need to find a flight sim model with this auto pilot (I did get a Logitech/Saitek Multi Panel with AutoPilot on it this weekend, so good timing!) that I can learn how the IAS, ALT, VS, HDG buttons work better. HDG and ALT I get, those just hold heading and alt, but airspeed and vertical speed climbs are still magical!
Luke then signed me off, so Im clear to rent any of the PA-28-161 that they have at Wings of Carolina. I told him I want to learn how to fly the Mooney M20J soon, Im excited to get my complex endorsement.

View File

@ -0,0 +1,69 @@
First Flight With Lauren
########################
:author: tyrel
:category: flying
:tags: flying
:status: published
Today was my first flight with my wife, Lauren. She is my first real passenger (“technically your DPE is, blah blah”). I didnt know what to expect, I knew she had been up in planes before shes gone skydiving, something I will probably never do. Id rather be the person to fly the “JUMPERS AWAY OVER X” than be a jumper. I dont want to make this entire blog about Lauren, although we all know I could. So I will try to keep it 50% airplane talk!
We scheduled a 12pm flight, with an estimate of me probably taking off at 12:30 (took off at 12:40 for pattern and 12:49 to KDAN), Cross country from KTTA to KDAN and back to KTTA. I wanted to fly at 4500msl there, and 5500msl back, following the East is Odd +500 and West is Even +500, because it was a 358°ish flight there and a 178°ish back (thats from airport center to airport center, but I did some cloud avoidance, a few times (like, the whole time) so I was pretty off course, but ForeFlight will get me there. I brought my Stratux because I remembered that N8116J didnt like bluetooth and ADSB so my iPad wouldnt connect to the plane. I also bought a new GPYes unit that I wanted to try out, and it worked great, no more magnetic GPS sticking to random magnetic things, everything is self contained in my Stratux!
Wind was good for RWY21, so I had to taxi via Taxiway Alfa to get there, still not a fan of how Wings of Carolina has us do a runup off the taxiway, something I need to get used to at a busier airport than KEEN. Well, we took off and I did a loop of the pattern I wanted to gauge Laurens stomach, and my flying abilities to make sure she was okay to fly. The Pressure Density was 2,800-2,900, which for a 255msl runway, oooof. After the second takeoff we flew out to the traffic pattern then departed to the north! We climbed up to 3000, the cloud layer was about 3800 so I chose to stay under it, vs fly over the top and chance not having an opening. It was pretty bumpy theres a convective SIGMET over like the whole east coast so I knew it was going to be a little bumpy. Lauren was taking pictures the whole time (she took 47! Ill share some) and got some fun ones of me. In my pictures I look like Im super concentration face, but she got a couple of me smiling.
Nearing KDAN I realized that the CTAF was Actually a CTAF (Common Traffic Advisory Frequency) and that KDAN had a tiny little tower. I called 15 to the south (because I heard a lot of traffic) and the nice person on the frequency came in and said something like 16J theres two planes on the taxiway, one in the pattern and one just departing, which now I understand why people come on our Unicom back at KEEN and keep saying “KEEN Unicom please advise”. Well we got closer I said I was flying over midfield to make a tear drop into the downwind. I did as such, flew over at 2500, did the tear drop, down to 1500 and landed. We then taxied to the FBO and shut down [my outside camera picked THREE seconds after I shut down to die, perfect timing]. The nice ramp assistant gave us a ride to the FBO in the golf cart so we could pee.
Gatorade passed through our system completely we headed out to the plane. We got some weird looks from the people chilling in the FBO (Enterprise people, and like a grandfather? idk) for wearing masks. Yes were both vaccinated, but I sure as hell dont know if the random people I run into are, gotta keep you safe!
We took a few pictures, and then went and started up the plane. When I was doing my run up, I didnt have the mixture full rich, was still leaned for ground ops, so when I did the mag drop I heard a backfire, was like OH SHIT and realized I was leaned. Put in full mixture, and did the mag drops again, ~150rpm loss and we were good to go. Lesson learned here is even if there are shortcuts for when the engine is hot, and you just land for 10 minutes, probably good to go through the full checklist even just skimming it.
We took down taxiway Alfa again and got to RWY02. Side note, KEEN has 02-20 and 14-32, this airport KDAN has 02-20 and 13-31 so when I came upon it, I was like “holycrap I feel like Im home”. Anyway when we got to the end of the taxiway there were two entrances only like 100ft apart to the runway, it was weird. We had to wait like 10 minutes to take off, because there were 4 planes doing touch and goes and they were perfectly spaced to give me like NO time to take off. I know how long of a runway I need to be safe, but with a 2900 Density Altitude, I know I needed a longer ground roll, so finding time to slip in to where I knew I could take off was annoying. Finally one of the guys on downwind said “Plane waiting at 02, Im extending my downwind a little bit to give you some time to take off, so I rolled out, thanked him and took off to the north a bit. I extended my upwind and gave the pattern a large buffer, then took off to the south.
Lauren seemed to be getting tired by like 75% of the trip back so maybe next time Ill take the plane for four hours, and then we can take a full hour between legs, instead of 15 minutes. I did three hours, because I planned for a longer break between we even bought zucchini bread I made last night! but I threw in that extra pattern lap before we left the airport, so that added like 15 minutes, and I couldnt find the flight book so that took some extra time.
When we were on the way back to Raleigh Exec, we saw another plane like 500 below us so I flew above them and circled past them then tried to come in behind them but I have no idea where they went when I flew over them, my ADSB decided to not pick them up, so I did a larger right turn so I knew Id avoid them. It was weird and Ill have to check FlightRadar24 playback to see but its not up now for some reason. After that steep turn I entered the downwind and landed. We landed with 2 minutes to spare, but it took a few minutes to shut down, and tie down. Glad someone wasnt right after us (if someone was I would not have gone as far of course). Covered the plane, paid the $260 for 2.3 hours of flying, put the book away and headed home.
The return trip took about exactly the same length. We left KTTA at 12:49, landed at KDAN at 1:36 (49min). Then with waiting for takeoff, we left KDAN at 2:07 and landed at 2:57(50min). On the flight back, it was a bit bumpier, the clouds were still scattered at about 3800 but some were darker than others so I flew around them. I wonder if when I finally fly IFR if Ill fly a lot straighter, instead of just “oops avoid that cloud!” that remains to be seen.
.. figure:: {static}/images/2021/06/14_tyrel-passenger-seat.jpg
:alt: Tyrel sitting in passenger seat, waiting for Lauren to get into plane.
Tyrel sitting in passenger seat, waiting for Lauren to get into plane.
.. figure:: {static}/images/2021/06/14_powerlines.jpg
:alt: Power line swath through the trees, with a nuclear power plant in the disance.
Power line swath through the trees, with a nuclear power plant in the disance.
.. figure:: {static}/images/2021/06/14_tyrel-looking-left.jpg
:alt: Tyrel looking to the left, watching for traffic
Tyrel looking to the left, watching for traffic
.. figure:: {static}/images/2021/06/14_danville-VA.jpg
:alt: Danville, Virginia airport, from above.
Danville, Virginia airport, from above.
.. figure:: {static}/images/2021/06/14-clouds.jpg
:alt: Clouds and the right wing of a Piper Warrior airplane
Clouds and the right wing of a Piper Warrior airplane
.. figure:: {static}/images/2021/06/14_tyrel-pulling.jpg
:alt: Tyrel pulling the plane forward, to get it lined up to push back for parking.
Tyrel pulling the plane forward, to get it lined up to push back for parking.
.. figure:: {static}/images/2021/06/14_TTA.gif
:alt: TTA Airpot Diagram
Airport Diagram of TTA
.. figure:: {static}/images/2021/06/14_DAN.gif
:alt: DAN Airport Diagram
Airport Diagram of DAN

View File

@ -0,0 +1,52 @@
First Flight With My Dad
########################
:author: tyrel
:category: flying
:tags: flying
:status: published
I actually did a flight on July 7th, but It was only one lap around the pattern. It was 95°F here, and I knew I wouldnt be in the right mind to continue my flight as I got to the traffic pattern after take off, so I just called crosswind, and headed back to land, a whopping 0.3 hour flight time! So thats what just one melting traffic pattern loop looks like!
.. figure:: {static}/images/2021/07/10_loop.png
:alt: GPS track around the TTA Airport, just one pattern loop
GPS track around the TTA Airport, just one pattern loop
Anyway! My father was excited to fly with me, we took N2114F up. We intended to go from KTTA-SDZ-KRCZ, but it was still hot, so we decided to just do SDZ and back.
We take off, and do one lap around the pattern I want this to be my standard when I bring new people up, it gives them a way out to say “GET ME OFF PLEASE”. After that one pattern lap we headed towards SDZ. It was a really smooth flight, we flew at 4500 feet to the VOR, then tried to get to 7500 feet on the way back (We had time, I wanted to climb) but it was just SO HOT that we ended up just staying at 5500feet, the climb was taking forever!
When we were 10mi from the airport, it started getting super busy (BBQ day at the airport!), so we decided to waste some time in the practice area and I did a steep turn for him to waste more time. After that the traffic died down so we headed back to KTTA. I did a touch and go, a regular landing, and then being that there was no other traffic, practiced an emergency engine out procedure (what I failed on my checkride) and that went smoothly.
So nothing super special about this trip, besides it was my first time flying my father.
.. figure:: {static}/images/2021/07/10_tyrel-in-passenger-seat.jpg
:alt: Me in the passenger seat climbing in and getting ready to go.
Me in the passenger seat climbing in and getting ready to go.
.. figure:: {static}/images/2021/07/10_tyrel-and-tony.jpg
:alt: Me and Dad sitting in airplane, somewhere above North Carolina
Me and Dad sitting in airplane, somewhere above North Carolina
.. figure:: {static}/images/2021/07/10_tyrel-pointing-out-window.jpg
:alt: Me pointing out the tiny window on the airplane.
Me pointing out the tiny window on the airplane.
.. figure:: {static}/images/2021/07/10_propeller-and-dashboard.jpg
:alt: Part of the dashboard, and CO detector, plus a blurry propeller in the background
Part of the dashboard, and CO detector, plus a blurry propeller in the background
.. figure:: {static}/images/2021/07/10_right-side-haze.jpg
:alt: Looking out the right window, the sky is hazy, part of a wing can be seen
Looking out the right window, the sky is hazy, part of a wing can be seen
.. figure:: {static}/images/2021/07/10_tony-and-tyrel.jpg
:alt: Inside the cockpit, profile view of me, and part of my father's head.
Inside the cockpit, profile view of me, and part of my father's head.

View File

@ -0,0 +1,22 @@
Mooney M20J checkout... Sort of
###############################
:author: tyrel
:category: flying
:tags: flying
:status: published
Tuesday night I emailed my instructor saying “Hey the Mooney is available Sunday afternoon, could we start getting me ready for a checkout”, and he said “sure, book it”, so I did. Then last night I started reading through the POH. Theres a lot of neat differences. Cowl flaps, retractable landing gear, constant speed prop. I definitely wanted to start getting my complex rating. I read through that POH, and look up a lot of videos on how to work the prop. Im used to just throttle and mixture in the Warriors, but this has throttle, manifold pressure, and mixture levers. I learned the cool parts about how the oil pressure, and springs set the propeller angle.
So I get to the airport at about 1pm, and we start talking about what I know. I explained how the undercarriage stuff works, under 132kias for lowering, and under 107kias for raising, and learned from Luke that theres two different speeds because of gravity and fighting gravity. We spend the first hour talking about why you need different manifold pressures. Then we head out to the plane and do a very comprehensive precheck. I learned that the M20J doesnt have a trim tab, the whole tail raises and lowers on a pivot, NEAT! The flaps are suuuper wide and the ailerons are kind of thin. The landing gear was an interesting inspection because of how the poles and hinges open/close the gear.
After the pre-flight we get flying. Things are pretty similar on the ground, as the propeller lever is pushed all the way forward, and the throttle is the main control. Luke points out that the propeller is rounded, so theres an RPM range that you shouldnt idle in, (1550-1950ish), vs the squarer prop that the other Mooney had.
We take off, and one thing I check different is if I have available runway left, and when I dont, I can raise the landing gear at that point. It was pretty cloudy, so we had to climb up to 5500, and eventually we hit 7000 to jump over some clouds. First time really being above clouds this much, for the first hour we were over them. For the climb out he told me to set the plane to “twenty-five squared” 2500rpm and 25in/hg. And every so often I would need to add more manifold pressure because of the atmosphere lapse rate while climbing.
We got up to 6000 ish, initially and then did some straight and level flying, super smooth above the clouds today. Then we did some 30 degree turns, did a few of those okay. When we did 45 degree turns, my first left one was kind of bad lost a lot of altitude. One to the right was okay, and then the third one to the left I kept my altitude right.
After turns we did slow flight, and its pretty much the same controls. The power off stalls I was I guess putting in unconscious left aileron, because we kept starting to spin a little to the left, next time I fly I definitely need to practice that more.
Well we ended up going pretty far east, at one point we were like 15 miles southeast of RDU, felt uncomfortable not talking to anyone there, but I guess it was out of the normal flight path for the jets so we were fine.We ended up needing to head back to the airport for 4pm, so I put the plane in a 750fpm descent while heading back, at one point I was able to punch through the clouds at around 2500, and we joined the traffic pattern on the 45 for downwind on 21. I landed VERY well he said. He said that people transitioning from Warriors to Mooneys land hard because the M20J is a lot lower of a plane than the PA28, so they flare early and land hard. I didnt flare early both times we landed so he said we could just end for the day. I always love when instructors say I do well with landings!
We then get back to the airport to do some payments and find out “Oh, Tyrel needs 250 hours without an instrument rating, to fly the M20J, or 150 with an instrument rating.” So Oops, I guess itll be a while before I can rent this, and get an actual check out.

View File

@ -0,0 +1,50 @@
Cessna 152 Checkout
###################
:author: tyrel
:category: flying
:tags: flying
:status: published
Today I got checked out in a Cessna 152. It was really my first time (besides spin training) flying high wing planes and I was a little nervous. We had a pretty standard pre-flight check, took a lot longer than just a “Im out here to go on a flight”, again because Luke was explaining things to me. Theres a lot of differences like with the warrior, all the flaps are on hinges, but in the Cessna, theres one pulley hinge and some rollers you need to check, not just actuation hinges. Pointed out how the landing gear is different, theres plastic fairings that we need to repair quite frequently, and there are no dampeners.
After the pre-flight we took off, Vr is pretty low, at 50 so the plane just wanted to float almost immediately in my opinion. It was also a cooler day outside than my most recent few flights, so that helped too. We took off, headed north to the practice area. I get up to 3000 msl and we level off, trim for cruise flight and lean the engine. This plane also has a vernier mixture control, so its nice to be able to dial in the mixture, even if theres no on screen display of the gallons per hour like the M20J. There were some clouds at 4000 I think, but they were tiny, and we figured we didnt need to go above them, so we stuck at the 3000 level.
This is where Luke says to just take the plane and do tiny things with it, like turn it uncoordinated, see how much rudder Id need to do a turn. So I did that for a bit, did a standard rate turn to the left, and we switched to some 30° turns, leveled off then did two 45° turns, back to back. I hit my prop wash at the end of the second one, that always feels great. The first few turns were gross, this plane has old cables for the ailerons, so theres a lot of play when turning, so it took a few tries to be able to maintain altitude and find that comfortable dead spot with cable tension. The last plane (M20J) I flew, everything was much stiffer for turning.
After the few turns, he said “oh no, there goes your engine” and throttled to idle. I looked around for a place to land, and didnt see one immediately. One thing I could have done better is look out the back window, because the 152 actually has one! Well I found a spot to “crash land” so I brought the plane to Vglide (60) and slowly descended towards the place to land. I guess in my “everything is okay” did the A B part of the emergency checklist, but I didnt do ABCDE, so we did it again. This time I:
* A- pitched for best airspeed (60kts)
* B- found the best place to land
* C - Checklist, pretended to check fuel, master, key, primer, etc.
* D - pretended to switch to 121.5mHz and declare an emergency
* E- executed the landing, and prepared to exit (opened the door, turn off mixture, etc so the plane doesnt blow up and I can get out)
and found a cute little field to land in. That was successful so we headed back towards the airport.
At the airport everything was standard traffic pattern. There were three of us in the pattern, one tail dragger that was always just behind us, really friendly guy who liked chatting on frequency, and one low wing maybe a warrior? I cant remember. Well I did six landings. One normal landing, three short field (the last one I did great, landed on numbers and was done before A2 taxiway entrance) and then a few more normal.
Luke said that I was death gripping the yoke, so he did one lap around the airport where he trimmed and only used his two fingers lightly to move the yoke. Watching him do that, I copied and did a lap around the pattern the same, much easier this time.
We then landed, taxied back and went to park. Parking is WILD, you sit on the tail and then back then walk backwards to get the plane in place. I guess when your planes max ramp weight is 1675lbs, thats easy to do! Three times as much as my motorcycle… After we chatted, he said he feels safe with me flying it, and I agreed. “I feel safe, but not super comfortable, but that only comes with time so I feel safe to take it up and get more comfortable”.
I then had to fill out the quiz, and scanned it, then emailed it to him.
.. figure:: {static}/images/2021/08/04_me-being-weird.jpg
:alt: Picture of me in the cockpit being a weirdo with a big smirky mouth
Picture of me in the cockpit being a weirdo with a big smirky mouth
.. figure:: {static}/images/2021/08/04_cessna-152-cockpit.jpg
:alt: The cockpit of a Cessna 152, yokes, gauges, etc. Outside you can see other planes on the ramp.
The cockpit of a Cessna 152, yokes, gauges, etc. Outside you can see other planes on the ramp.
.. figure:: {static}/images/2021/08/04_3d-track-1.jpg
:alt: Just a 3d diagram of the flight, not sure what I was focusing on here.
Just a 3d diagram of the flight, not sure what I was focusing on here.
.. figure:: {static}/images/2021/08/04_3d-track-2.jpg
:alt: Just a 3d diagram of the flight, not sure what I was focusing on here.
Just a 3d diagram of the flight, not sure what I was focusing on here.

View File

@ -0,0 +1,57 @@
Two flights and some nice weather
#################################
:author: tyrel
:category: flying
:tags: flying
:status: published
The other day there was a call to action on the Wings of Carolina slack. “Is anyone able to help this pilot get one of our planes back?” Seems this newly licensed pilot, (Congrats!) passed his check ride on Friday and the weather was not great so had to leave N69012 at Asheboro. I said I would be glad to help out if the IFR weather cleared by 9am, I could give him a ride over in N8080A.
I booked a 9am-12pm block, and got to the airport at 8:55am. Grabbed the 80A book book and went to the lounge to check weather. Luckily the fog had burned off and the skies were clear! The pilot met me in the lounge, I wrapped up the weather briefing (nothing of note) and we went out to preflight. The left red nav light was out, but thats only required at night, confirmed by asking the other pilot. The fuel truck came and filled us up to the tabs (34 gallons) and we were off.
My flight plans were from KTTA -> KHBI (drop off pilot) -> KEXX then back to KTTA. Just under a 2 hour round trip, which took a bit longer because when we got to the hold short line for RWY03, I realized my iPad wasnt connected to the GPS, so we fiddled with it for a few (no one was behind us, but oof Hobbs running) and couldnt get it working. Thats fine, we had our GPS and the pilot knew what KHBI looked like form the air. We took off, departed the pattern to the north, got to a little bit higher then turned west.
The pilot was super helpful, having a copilot be able to put in the radios for Siler City as we passed, and the AWOS/CTAFs in for KHBI was actually a really big load off my plate. Its the little things! Flew at about 3000ft over to KHBI because It was only a 20 minute flight so I stayed low. We get to the airport and he lets me know that RWY24 has a papi, so we chose that runway to land on. Land pretty okay, didnt grease it, but it is what it is. Taxi over and get him to his plane. I shut down so he can get out safely, then realize after he got out, I CANT OPEN THE DOOR. I had to yell him over to make sure I could open the door again, the bottom latch was stuck! I recorded a video, then instagrammed a `fellow pilot who is famous in his circles for getting stuck in his plane and having to call someone down in the area who landed and helped him out <https://www.instagram.com/p/CLnMONphlsu/>`_. Told him hes not alone, hah.
Anyway, I was able to open the door so I felt like it was okay if I crashed and had to open the door myself. I turn the plane back on, plug in my Stratux for ADSB on iPad, and get ready to take off. I taxi over to the runway (took 24 again out) and hold short for a taildragger and another plane to land. I then take off and woahh there were like 80 birds at the end of the runway at like 300ft up. Luckily I was able to scare them and flew above them, then departed to the right (west) and headed to KEXX. Luckily thr CTAF is the same for both (122.8) so I was able to hear the traffic without fiddling with the radio. I set the AWOS beforehand, so I checked that when I was close, and still winds calm, not bad.
Got 10 miles, out, announced position, 5 miles out, announced I was entering the downwind at a 45. I was on the down when a pilot to my right asked if I was on base, kind of weirded out because I wasnt so I was vigilant and said I was on downwind (again…). Then called base, and final and landed. Final was neat at Davidson county, had to fly over a factory, which was kind of cool.
Landed, taxied back to the runway and lined up and waited again. The taildragger had followed me! Saw him land as I was at the hold short line. Waited for a jet to land and then off I went! I climbed out, departed to the east, and climbed up to 5500msl. Held 5500 very well this trip, the air was super calm and Im getting better at electric trim, much easier than just wheel trim.
At one point I turn the auto pilot on, with it set to 109° and 5500msl, but for some reason it made me descend and banked me left 45° and I wasnt liking that so I disengaged it. I climbed up back to 5500 for the rest of my trip. By the time I was back to KTTA, the winds still favored RWY03, so I joined the pattern on a 45° entry, and landed smoothly. At around 3000msl descending near Ashbury it was a bit bumpy, but thats the only turbulence I experienced. Such a nice morning.
Well I get back to the airport and land and shut down… Im stuck again! Door wont open. There was no one around I could yell to, so I called the front desk, no answer. I tried again, using different pressures and trying to see if there was like a little latch that didnt hook. I fiddled for a few minutes and was able to get out, I guess I got it just right.
I then cover the plane, and squawk the door not opening, and posted the video on slack. The next pilot replied to my slack post later that evening that he had no problems. Maybe Im just door cursed.
Lauren and I then went to lunch before my next flight where I was taking her up in a Cessna 152 (N89333). Well we do the preflight dance, go taxi and take off. At like 300 above the runway, the damn pilot side door opens up! Its fine but I dont want to worry my wife, on her second flight with me ever, so I have her hold the door closed while I go finish the pattern loop (I was doing that anyway). Well MORE fun happened the pilots PTT(push to talk) button got stuck off, so I had to use her microphone to talk, (I could have just switched the plugs, but we were in the base turn). I kind of overshot base so had to over correct a little bit, but we landed okay, taxied back and agreed we were discontinuing our flight. We could have gone back up and carried on we had the allotted time but you know what? The rest of the flight wasnt in the cards.
Video of me trapped in The Warrior - `https://youtu.be/0uAL30nCuYE <https://youtu.be/0uAL30nCuYE>`_.
.. figure:: {static}/images/2021/08/08_cockpit_selfie.jpg
:alt: Selfie in the cockpit, me wearing a blue shirt.
Cockpit Selfie
.. figure:: {static}/images/2021/08/08_behind_left_wing.jpg
:alt: A look at the ground behind the left wing
A look at the ground behind the left wing
.. figure:: {static}/images/2021/08/08_behind_right_wing.jpg
:alt: Looking at a runway in the distance, not sure which one now.
Looking at a runway in the distance, not sure which one now.
.. figure:: {static}/images/2021/08/08_hazy-highway.jpg
:alt: Looking in front of the left wing, at a highway, the sky is hazy
Looking in front of the left wing, at a highway, the sky is hazy
.. figure:: {static}/images/2021/08/08_hazy_runway.jpg
:alt: Hazy sky with a runway a couple miles away.
Hazy sky with a runway a couple miles away.

View File

@ -0,0 +1,78 @@
Back Above Keene
################
:author: tyrel
:category: flying
:tags: flying
:status: published
.. figure:: {static}/images/2021/10/17_me_mom_n43337.jpg
:alt: Mom and I hugging in front of the right wing of N43337
Mom and I hugging in front of the right wing of N43337
Its my brothers wedding weekend and he asked me to take him and his new father-in-law flying. On October 16th I get to the airport, very well knowing that its still too foggy for my 8am-10am flight that I was about to cancel in person. I still went in, because I havent seen Beth in almost a year and wanted to say hi. We caught up, talked about how Ive been going to Monadnock Aviation since I was in college after my first flight on March 17, 2010! I called Levi and told him that we werent flying, so he should just go finish getting ready for his wedding at 11:30.
The next day I had booked for my mother to go up the first time with me. We get to the airport at 9:55 and the FBO is locked up, Uhhhh. I email/text some people and no one knows how to get a hold of the desk attendant. We had apparently JUST missed David, one of the CFIs, who was getting into N44836 with a student I presume. So we waited a bit and it seems he was called away to do some fueling with the fuel truck. No fault of his at all, Sundays can get a little rough with only one person being at the FBOs desk.
We finally grab the book and keys and I go out and preflight. Im in N43337 today, my favorite plane. Im even wearing my “WARRIOR 337” shirt I got for soloing, for good luck! Preflight was easy as usual, once youve done it a hundred times in the same plane, you know what youre looking for from the checklists.
I waved to mom and Lauren to come over and we got in, I showed mom and Lauren how to set up the headphones and get into the back seat. Following a safety briefing we were off!
We taxied over from the Northwest ramp (The FBO area) to the East ramp and I did my run up there, the winds were 340° at 7kts gusting to 17, so the other planes were using runway 32. Waited around a bit for a radio check, the PTT button was sticky and no one was replying to my ask for radio checks, even though there were a few planes around, oh well.
We took off on runway 32 after waiting in line (it was busy today, wow!) and I did a lap around the pattern. It was not clean, I havent flown in just over two months, and we had the added weight of a back passenger, so I was a little nervous the first pattern loop. But I will always do one pattern loop with a new passenger just to give them a chance to bail out!
Im not fond of runway 32, it has a high hill over Marcy Hill in Swanzey, NH and it always throws me off (probably because I have like 300 landings on runway 02 and maybe 15 on runway 32). The landing was fine, Lauren was taking pictures from the back and my mom said it was “wicked smooth, and you barely even felt the tires hit, I thought it was great, especially with the wind and everything” which as a first time passenger in a “oh my god I didnt know it was quite this small” airplane, I feel good about!
We then taxied back to 32, and took off again, this time it was a west departure out to Spofford Lake and over my moms house in Chesterfield. I probably should have headed to Brattleboro first after Spofford. Had I done this, we would have been in position to fly Brattleboro, VT north to Putney, VT west of the Connecticut River and my mom would have gotten a MUCH nicer view of her house. Instead we flew over the lake and through a little valley over Westmoreland and went south along the river.
At one point I saw a dark cloud above and said “Okay were about to go under a dark cloud, Ill try to avoid it but it might get turbulent”, so mom and Lauren would know to hold on and probably 10 seconds later the plane went “woomp” down a bit because of turbulence so they were prepared. After that small cloud we found a tiny patch of clean air and I turned to the right a little bit above Exit 3 and headed north again towards moms house, staying a little bit west of the river. I paralleled I91 again for a minute or two and then we got in line that I could fly close enough to moms house that she could see it.
After that fun bit we headed back, directly over Spofford Lake for some more sights, and onward to KEEN.
We flew over Yale Forest, and I saw a cool cliff face I had never seen before as we were entering RWY32 on a 45° entry. Entered the pattern and found myself VERY high (900msl at at 488msl airport) on final, on a 4000 runway with a displaced threshold so I executed a go around there. I probably could have made it, but with the wind and avoiding Marcy Hill, I figure its always safe to Go Around.
The next loop I had my sight pictures again at runway 32 and we landed, rolled out to Taxiway Sierra and parked the plane!
Mom said it was fun!
.. figure:: {static}/images/2021/10/17_back-of-my-head.jpg
:alt: Back of my head while turning a bit
Back of my head while turning a bit
.. figure:: {static}/images/2021/10/17_cloudy-sun-view.jpg
:alt: Cloudy and Sunny View off the right wing. Monadnock in the distance.
Cloudy and Sunny View off the right wing. Monadnock in the distance.
.. figure:: {static}/images/2021/10/17_hannaford-kmart.jpg
:alt: Turning over route 9 near Home Depot and Hannaford
Turning over route 9 near Home Depot and Hannaford
.. figure:: {static}/images/2021/10/17_landing-32-14-on-final.jpg
:alt: Cockpit view, a mile out from runway 32/14 with the runway in sight.
Cockpit view, a mile out from runway 32/14 with the runway in sight.
.. figure:: {static}/images/2021/10/17_landing-32-14-short-final.jpg
:alt: Cockpit view, a 1/4 mile from runway 32/14 with the runway in sight.
Cockpit view, a 1/4 mile from runway 32/14 with the runway in sight.
.. figure:: {static}/images/2021/10/17_left-wing-looking-at-airport-and-monadnock.jpg
:alt: Looking off the left wing at mount Monadnock.
Looking off the left wing at mount Monadnock.
.. figure:: {static}/images/2021/10/17_sun-above-right-wing.jpg
:alt: Just pretty sky views, out the right window above the right wing at the sun and clouds.
Just pretty sky views, out the right window above the right wing at the sun and clouds.
.. figure:: {static}/images/2021/10/17_turning-from-backseat.jpg
:alt: Three degree turn above moms house.
Three degree turn above moms house.

Binary file not shown.

After

Width:  |  Height:  |  Size: 393 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 410 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 116 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 490 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 10 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 6.2 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 765 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 609 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 693 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 630 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 795 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 222 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 34 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 22 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 77 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 81 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 54 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 60 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 294 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 315 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 122 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 71 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 247 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 230 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 298 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 346 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 158 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 420 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 311 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 74 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 103 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 462 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 439 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 537 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 351 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 498 KiB