more damn ticks

content/blog/2021-06-14_first-flight-with-lauren.rst

@@ -9,19 +9,19 @@ Today was my first flight with my wife, Lauren. She is my first real passenger (
 
 We scheduled a 12pm flight, with an estimate of me probably taking off at 12:30 (took off at 12:40 for pattern and 12:49 to KDAN), Cross country from KTTA to KDAN and back to KTTA. I wanted to fly at 4500'msl there, and 5500'msl back, following the East is Odd +500 and West is Even +500, because it was a 358°ish flight there and a 178°ish back (that's from airport center to airport center, but I did some cloud avoidance, a few times (like, the whole time) so I was pretty off course, but ForeFlight will get me there. I brought my Stratux because I remembered that N8116J didn't like bluetooth and ADSB so my iPad wouldn't connect to the plane. I also bought a new GPYes unit that I wanted to try out, and it worked great, no more magnetic GPS sticking to random magnetic things, everything is self contained in my Stratux!
 
-Wind was good for RWY21, so I had to taxi via Taxiway Alfa to get there, still not a fan of how Wings of Carolina has us do a runup off the taxiway, something I need to get used to at a busier airport than KEEN. Well, we took off and I did a loop of the pattern - I wanted to gauge Lauren's stomach, and my flying abilities to make sure she was okay to fly. The Pressure Density was 2,800′-2,900, which for a 255'msl runway, oooof. After the second takeoff we flew out to the traffic pattern then departed to the north! We climbed up to 3000, the cloud layer was about 3800 so I chose to stay under it, vs fly over the top and chance not having an opening. It was pretty bumpy - there's a convective SIGMET over like the whole east coast - so I knew it was going to be a little bumpy. Lauren was taking pictures the whole time (she took 47! I'll share some) and got some fun ones of me. In my pictures I look like I'm super concentration face, but she got a couple of me smiling.
+Wind was good for RWY21, so I had to taxi via Taxiway Alfa to get there, still not a fan of how Wings of Carolina has us do a runup off the taxiway, something I need to get used to at a busier airport than KEEN. Well, we took off and I did a loop of the pattern - I wanted to gauge Lauren's stomach, and my flying abilities to make sure she was okay to fly. The Pressure Density was 2,800'-2,900, which for a 255'msl runway, oooof. After the second takeoff we flew out to the traffic pattern then departed to the north! We climbed up to 3000, the cloud layer was about 3800 so I chose to stay under it, vs fly over the top and chance not having an opening. It was pretty bumpy - there's a convective SIGMET over like the whole east coast - so I knew it was going to be a little bumpy. Lauren was taking pictures the whole time (she took 47! I'll share some) and got some fun ones of me. In my pictures I look like I'm super concentration face, but she got a couple of me smiling.
 
-Nearing KDAN I realized that the CTAF was Actually a CTAF (Common Traffic Advisory Frequency) and that KDAN had a tiny little tower. I called 15 to the south (because I heard a lot of traffic) and the nice person on the frequency came in and said something like 16J there's two planes on the taxiway, one in the pattern and one just departing, which now I understand why people come on our Unicom back at KEEN and keep saying "KEEN Unicom please advise". Well we got closer I said I was flying over midfield to make a tear drop into the downwind. I did as such, flew over at 2500′, did the tear drop, down to 1500′ and landed. We then taxied to the FBO and shut down [my outside camera picked THREE seconds after I shut down to die, perfect timing]. The nice ramp assistant gave us a ride to the FBO in the golf cart so we could pee.
+Nearing KDAN I realized that the CTAF was Actually a CTAF (Common Traffic Advisory Frequency) and that KDAN had a tiny little tower. I called 15 to the south (because I heard a lot of traffic) and the nice person on the frequency came in and said something like 16J there's two planes on the taxiway, one in the pattern and one just departing, which now I understand why people come on our Unicom back at KEEN and keep saying "KEEN Unicom please advise". Well we got closer I said I was flying over midfield to make a tear drop into the downwind. I did as such, flew over at 2500', did the tear drop, down to 1500' and landed. We then taxied to the FBO and shut down [my outside camera picked THREE seconds after I shut down to die, perfect timing]. The nice ramp assistant gave us a ride to the FBO in the golf cart so we could pee.
 
 Gatorade passed through our system completely we headed out to the plane. We got some weird looks from the people chilling in the FBO (Enterprise people, and like a grandfather? idk) for wearing masks. Yes we're both vaccinated, but I sure as hell don't know if the random people I run into are, gotta keep you safe!
 
 We took a few pictures, and then went and started up the plane. When I was doing my run up, I didn't have the mixture full rich, was still leaned for ground ops, so when I did the mag drop I heard a backfire, was like OH SHIT and realized I was leaned. Put in full mixture, and did the mag drops again, ~150rpm loss and we were good to go. Lesson learned here is even if there are shortcuts for when the engine is hot, and you just land for 10 minutes, probably good to go through the full checklist even just skimming it.
 
-We took down taxiway Alfa again and got to RWY02. Side note, KEEN has 02-20 and 14-32, this airport KDAN has 02-20 and 13-31 so when I came upon it, I was like "holycrap I feel like I'm home". Anyway - when we got to the end of the taxiway there were two entrances only like 100ft apart to the runway, it was weird. We had to wait like 10 minutes to take off, because there were 4 planes doing touch and goes and they were perfectly spaced to give me like NO time to take off. I know how long of a runway I need to be safe, but with a 2900′ Density Altitude, I know I needed a longer ground roll, so finding time to slip in to where I knew I could take off was annoying. Finally one of the guys on downwind said "Plane waiting at 02, I'm extending my downwind a little bit to give you some time to take off, so I rolled out, thanked him and took off to the north a bit. I extended my upwind and gave the pattern a large buffer, then took off to the south.
+We took down taxiway Alfa again and got to RWY02. Side note, KEEN has 02-20 and 14-32, this airport KDAN has 02-20 and 13-31 so when I came upon it, I was like "holycrap I feel like I'm home". Anyway - when we got to the end of the taxiway there were two entrances only like 100ft apart to the runway, it was weird. We had to wait like 10 minutes to take off, because there were 4 planes doing touch and goes and they were perfectly spaced to give me like NO time to take off. I know how long of a runway I need to be safe, but with a 2900' Density Altitude, I know I needed a longer ground roll, so finding time to slip in to where I knew I could take off was annoying. Finally one of the guys on downwind said "Plane waiting at 02, I'm extending my downwind a little bit to give you some time to take off, so I rolled out, thanked him and took off to the north a bit. I extended my upwind and gave the pattern a large buffer, then took off to the south.
 
 Lauren seemed to be getting tired by like 75% of the trip back so maybe next time I'll take the plane for four hours, and then we can take a full hour between legs, instead of 15 minutes. I did three hours, because I planned for a longer break between - we even bought zucchini bread I made last night! - but I threw in that extra pattern lap before we left the airport, so that added like 15 minutes, and I couldn't find the flight book so that took some extra time.
 
-When we were on the way back to Raleigh Exec, we saw another plane like 500′ below us so I flew above them and circled past them then tried to come in behind them but I have no idea where they went when I flew over them, my ADSB decided to not pick them up, so I did a larger right turn so I knew I'd avoid them. It was weird and I'll have to check FlightRadar24 playback to see - but it's not up now for some reason. After that steep turn I entered the downwind and landed. We landed with 2 minutes to spare, but it took a few minutes to shut down, and tie down. Glad someone wasn't right after us (if someone was I would not have gone as far of course). Covered the plane, paid the $260 for 2.3 hours of flying, put the book away and headed home.
+When we were on the way back to Raleigh Exec, we saw another plane like 500' below us so I flew above them and circled past them then tried to come in behind them but I have no idea where they went when I flew over them, my ADSB decided to not pick them up, so I did a larger right turn so I knew I'd avoid them. It was weird and I'll have to check FlightRadar24 playback to see - but it's not up now for some reason. After that steep turn I entered the downwind and landed. We landed with 2 minutes to spare, but it took a few minutes to shut down, and tie down. Glad someone wasn't right after us (if someone was I would not have gone as far of course). Covered the plane, paid the $260 for 2.3 hours of flying, put the book away and headed home.
 
 The return trip took about exactly the same length. We left KTTA at 12:49, landed at KDAN at 1:36 (49min). Then with waiting for takeoff, we left KDAN at 2:07 and landed at 2:57(50min). On the flight back, it was a bit bumpier, the clouds were still scattered at about 3800 but some were darker than others so I flew around them. I wonder if when I finally fly IFR if I'll fly a lot straighter, instead of just "oops avoid that cloud!" that remains to be seen.
 

content/blog/2021-08-04_cessna-152-checkout.rst

@@ -7,7 +7,7 @@ Cessna 152 Checkout
 
 Today I got checked out in a Cessna 152. It was really my first time (besides spin training) flying high wing planes and I was a little nervous. We had a pretty standard pre-flight check, took a lot longer than just a "I'm out here to go on a flight", again because Luke was explaining things to me. There's a lot of differences like with the warrior, all the flaps are on hinges, but in the Cessna, there's one pulley hinge and some rollers you need to check, not just actuation hinges. Pointed out how the landing gear is different, there's plastic fairings that we need to repair quite frequently, and there are no dampeners.
 
-After the pre-flight we took off, Vr is pretty low, at 50 so the plane just wanted to float almost immediately in my opinion. It was also a cooler day outside than my most recent few flights, so that helped too. We took off, headed north to the practice area. I get up to 3000′ msl and we level off, trim for cruise flight and lean the engine. This plane also has a vernier mixture control, so it's nice to be able to dial in the mixture, even if there's no on screen display of the gallons per hour like the M20J. There were some clouds at 4000′ I think, but they were tiny, and we figured we didn't need to go above them, so we stuck at the 3000′ level.
+After the pre-flight we took off, Vr is pretty low, at 50 so the plane just wanted to float almost immediately in my opinion. It was also a cooler day outside than my most recent few flights, so that helped too. We took off, headed north to the practice area. I get up to 3000' msl and we level off, trim for cruise flight and lean the engine. This plane also has a vernier mixture control, so it's nice to be able to dial in the mixture, even if there's no on screen display of the gallons per hour like the M20J. There were some clouds at 4000' I think, but they were tiny, and we figured we didn't need to go above them, so we stuck at the 3000' level.
 
 This is where Luke says to just take the plane and do tiny things with it, like turn it uncoordinated, see how much rudder I'd need to do a turn. So I did that for a bit, did a standard rate turn to the left, and we switched to some 30° turns, leveled off then did two 45° turns, back to back. I hit my prop wash at the end of the second one, that always feels great. The first few turns were gross, this plane has old cables for the ailerons, so there's a lot of play when turning, so it took a few tries to be able to maintain altitude and find that comfortable dead spot with cable tension. The last plane (M20J) I flew, everything was much stiffer for turning.
 

content/blog/2021-10-17_back-above-keene.rst

@@ -30,7 +30,7 @@ At one point I saw a dark cloud above and said "Okay we're about to go under a d
 
 After that fun bit we headed back, directly over Spofford Lake for some more sights, and onward to KEEN.
 
-We flew over Yale Forest, and I saw a cool cliff face I had never seen before - as we were entering RWY32 on a 45° entry. Entered the pattern and found myself VERY high (900msl at at 488msl airport) on final, on a 4000′ runway with a displaced threshold so I executed a go around there. I probably could have made it, but with the wind and avoiding Marcy Hill, I figure it's always safe to Go Around.
+We flew over Yale Forest, and I saw a cool cliff face I had never seen before - as we were entering RWY32 on a 45° entry. Entered the pattern and found myself VERY high (900msl at at 488msl airport) on final, on a 4000' runway with a displaced threshold so I executed a go around there. I probably could have made it, but with the wind and avoiding Marcy Hill, I figure it's always safe to Go Around.
 
 The next loop I had my sight pictures again at runway 32 and we landed, rolled out to Taxiway Sierra and parked the plane!