fix captions, add some code, and fix image

content/blog/2022-01-09_garage-door-opener.rst

@@ -26,7 +26,7 @@ I knew I would need some sort of relay (domain purchased from is gone) and `reed
 
 Home Assistant has a plugin called ESPHome where you can write yaml files to configure an esp8266 module. This then builds a binary which you need to flash onto the esp8266 at least once via usb. From then on you can then on you can upload from a web form and drop the bin file in manually, or just press the UPLOAD button from ESPHome. I set my relay up on pin 19/D1 for the digital pin, and 16/GND,10/3v3 for the power. The Reed switch I tossed on 15/D7 and 11/GND but that could have been anywhere. See Schematic below. It still doesn't have an enclosure.
 
-.. figure:: https://thumbnails-photos.amazon.com/v1/thumbnail/ipyyo6AWROe1t6_LDvhs-w?viewBox=1742%2C1306&ownerId=A2XF3XCOUKGXAO
+.. figure:: {static}/images/2022/01/09_relay.jpg
    :alt: Relay in blue, and wires going to the NodeMCU
 
    Relay in blue, and wires going to the NodeMCU
@@ -90,6 +90,22 @@ Once the door was opening and closing, I was able to add more yaml to set anothe
 
 All together this is shown on my Home Assistant Lovelace dashboard using two cards, one that shows a closed door, and one with an open door (both actual pictures of the door!) with a button to open it. Once it opens or closes the other card switches into place, Home Assistant at least at the time didn't have good conditional cards like I wanted.
 
+.. code:: yaml
+
+   type: conditional
+   conditions:
+     - entity: binary_sensor.garage_door_closed
+       state: 'on'
+   card:
+     type: picture-glance
+     title: Garage (Closed)
+     image: 'https://tyrel.dev/house/garage_door.jpeg'
+     entities:
+       - entity: switch.garage_remote
+     hold_action:
+       action: none
+
+
 .. figure:: {static}/images/2022/01/garage-Lovelace_garage_door_closed.png
    :alt: Closed door state and button
 
@@ -97,6 +113,12 @@ All together this is shown on my Home Assistant Lovelace dashboard using two car
 
 Happy with the state of my Garage Door opening button, I can now yell at my phone to open the garage door (it's a "secure" switch so it requires the phone to to be open before OK Google will trigger the door).
 
-There's a couple more pictures in my `Instagram post <https://www.instagram.com/p/CIrYO3SlxON/>`__ about it, and another `write up on my wiki. <https://tyrel.website/wiki/Garage_Door_ESPHome>`__
+There's a couple more pictures in my `Instagram post <https://www.instagram.com/p/CIrYO3SlxON/>`__ about it.
 
 I know I could have bought a device to do this myself, but this is fully mine, my code, and my experiment with learning how to automate things at home, I gained way more out of this project than I did if I just bought a MyQ or what ever is popular these days.
+
+
+Notes
+~~~~~
+
+This is no longer in service, as I replaced the door and have a Chamberlain MyQ system now. Less fun, but at least it's serviceable.

themes/solarized/static/css/main.css

@@ -227,3 +227,9 @@ ul ul {
   margin-right:1rem;
 } 
 
+
+.caption {
+  padding-left: 5rem;
+  font-style: italic;
+}
+